Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.
After performing the needed configuration in the "Basic Settings" menu, you must save all the new parameters by clicking the «Apply» button. If you are not sure about the effect of the new configuration performed, you can apply the new configuration temporarily by clicking the «Test» button. The previous configuration is automatically restored after a grace period of 180 seconds (3 minutes). You have the options to extend the grace period, or immediately accept/reject the changes.
By clicking the «Preview Configuration» button, you can view the configuration results in CLI format. In order to display all changes added to configuration in CLI format since last save, click the «Show changes» button.
A warning message is displayed in this section to inform about the consequences of saving configuration via Web or CLI interfaces:
After clicking the «Apply» button for saving the new configuration, the system will redirect you to the login page. After a 5 seconds timer you can log in back to the unit and check the new configuration.