Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.
sys uptime
Displays the system up time since the last reboot and the reason of this reboot.
Figure - "sys uptime" command output
The possible options are:
- Software fault
- Unexpected restart
- Manual restart
- Manual delayed restart
- Firmware upgrade
- SNMP managed restart
- Test firmware loaded.
sys log show
Displays the unit event log.
sys info -full
Displays the detailed information about:
- System
- Memory
- CPU
- Flash
- DFFS
- License
- PHY0
- PHY1.
Figure - "sys info -full" command output
config show
Displays the current unit configuration.
ifconfig -a
Displays the detailed information about network and radio interface.
Figure - "ifconfig -a" command output
license -show
Displays options available in this license
Figure - "license -show" command output
ctl
Displays the switch board temperature.
Figure - "ctl" command output
tsync
Displays the synchronization statistics via built-in GLONASS/GPS receiver.
mem
Displays the memory utilization statistics.
Figure - "mem" command output