...
Step 3: Use tightening torque of 16 Nm on the Nuts of Bolts M8x165 with 12.7 mm open end, or deep socket wrench. Tool's length should not exceed 20 cm.
Step 4: Use initial tightening torque of 10 Nm on Central bolts (x2) and Azimuth Lock bolts (x4). Use 12.7 mm open end, or deep socket wrench.
...
Step 13: After fine adjustment use tightening lock torque of 16 Nm on Azimuth Lock bolts and on Central bolts. Use tightening lock torque of 16 Nm on the Nuts of Elevation Lock bolts. Use 12.7 mm open end, or deep socket wrench.
...