...
| Center |
|---|
| Scroll Title |
|---|
| title | Figure - Status page |
|---|
|  Image Removed Image Added
|
|
You can set the "Auto Refresh" option to refresh the statistics automatically. The “Auto refresh” is available in the bottom-left side of the "Status" page, along with the «Show GNSS Statistics» button. If GNSS is in use and GNSS monitoring is enabled, its statistics can be queried by clicking on «Show GNSS Statistics».
...
| Center |
|---|
| Scroll Title |
|---|
| title | Table - General radio link parameters |
|---|
| | Parameter | Description |
|---|
| Wireless Link Status | - Displays the status of the radio link which can be “Up” or “Down”
| | Measured Distance | - Displays the measured distance of the radio link in meters
- If the remote end stats is disabled, the measured distance is only shown at the slave unit
| | Channel Width | - Displays the channel bandwidth that is in use
| | DL/UL Ratio | - Displays actual downlink/uplink ratio
- "Downlink" - data transmission from Master to Slave
- "Uplink" - data transmission from Slave to Master
| | Superframe LengthFrame Period | |
|
|
- "Real time radio link status" - displays the following parameters of the radio link in real time for both the local and remote unit:
...