...
"Vlan" interfaces
Make sure that the "vlan" interfaces are configured in accordance with the company's security policy (see point 1 in the figure below). The VLAN configuration process using the command line is described in the "VLAN configuration" article.
...
Make sure that the switch group for the device management is configured correctly (see point 3 in the figure above). To :
- To access the device via the radio interface, the rf5.0 interface must be added to the management switch group.
...
- The svi interface must be associated with the switch group. The interface can be associated using the "svi" command (point 4).
- The device's management IP address must be assigned to the svi interface using the "ifconfig" command (point 1). The switch groups are configured using the "switch" command.
Checking the members of the switch group
To display information about the devices included in the switch groups, use the "mint rf5.0 map swg" command.
...
Make sure that the switch group ID assigned for management on the local device matches with the switch group ID on the remote device. Make sure that the rf5.0 interface has been added to the switch group. The svi interface is must be associated with the switch group and its IP address is used for the management of the device management. For detailed information about the device management configuration proceed to the "Remote management of the R5000 units" article.
...