...
| Center |
|---|
| Parameter | Description |
|---|
| Count | - Number of the registered frames (packets)
| | MAC | | | Type | | | Level | - First value - signal level relative to the receiver sensitivity at a given modulation (bitrate), in dB
- Second value - absolute input signal level, in dBm
| | Bitrate | | | Length | - Average frame length in bytes
| | Name | | | SID | - Network system identifier
| | Freq | | | Total sources | | | Total packets | - Total number of the registered frames (packets)
| | Skipped packets | - Number of skipped (unaccounted) packets due to queue overflow or lack of CPU resources
| | CRC errors | - Number of errors in the checksum calculation
| | Pulses | - Number of pulses, their average level and average number of pulses per secondPulses noise counter:
- The first value is the number of electromagnetic energy peaks during the scanner operation. The Pulses counter includes frames for which the modulation and source MAC address could not be recognized.
- The "avg level" value shows an average noise level, the first value is a noise level relative to the receiver sensitivity at a given modulation (dB), the second is an absolute input signal level (dBm).
- The "avg pps" value indicates an average pulses per second number. The value over 50 pps indicates a high noise level.
|
|
The abbreviations for each node type are also displayed in the interface:
...