...
Режим отображается вместе с префиксом команды в виде "RIP(режим)#". На рисунке ниже показана диаграмма переходов между режимами КО. Изначально КО находится Изначально КО находится в базовом режиме, который содержит набор команд только для просмотра текущего состояния маршрутизатора. Переход в режим конфигурации разрешен только для пользователя WANFlexпользователя системы, имеющего привилегии "super-user". После перехода в режим конфигурации выполняется его блокировка. Таким образом, вход в этот режим с другого терминала (например, другая сессия "telnet") будет невозможен. Для исключения "мертвой" блокировки КО автоматически выходит из режимов конфигурации, если в течение 2 минут не поступало никаких команд.
...
Code Block | ||||
---|---|---|---|---|
| ||||
configure Configuration access-list Add an access list entry clear Reset functions end End current mode and change to root mode (CTRL+C). exit Back to WANFlex command shell (CTRL+D). help Print command list interface Select an interface to configure authentication Authentication control description Interface specific description end End current mode and change to root mode (CTRL+C). exit Back to WANFlex command shell (CTRL+D). help Print command list no Negate a command or set its defaults receive Advertisement reception send Advertisement transmission show Show running system information split-horizon Perform split horizon key Authentication key management no Negate a command or set its defaults prefix-list Build a prefix list route-map Create route-map or enter route-map command mode end End current mode and change to root mode (CTRL+C). exit Back to WANFlex command shell (CTRL+D). help Print command list match Match values from routing table no Negate a command or set its defaults on-match Exit policy on matches route-map Create route-map or enter route-map command mode set Set values in destination routing protocol show Show running system information router Enable RIP routing process default-information Control distribution of default route default-metric Set a metric of redistribute routes distance Administrative distance distribute-list Filter networks in routing updates end End current mode and change to root mode (CTRL+C). exit Back to WANFlex command shell (CTRL+D). help Print command list neighbor Specify a neighbor router network Enable routing on an IP network no Negate a command or set its defaults offset-list Modify RIP metric passive-interface Suppress routing updates on an interface redistribute Redistribute information from another routing protocol route RIP static route configuration route-map Route map set show Show running system information tagged Tagged mode timers Adjust routing timers version Set routing protocol version show Show running system information stop stop debug Set debugging print level end End current mode and change to root mode (CTRL+C). exit Back to WANFlex command shell (CTRL+D). help Print command list no Negate a command or set its defaults show Show running system information access-list List IP access lists memory Memory statistics prefix-list Build a prefix list rip IP routing protocol process parameters and statistics route Show RIP routes running-config running configuration thread Thread information version Displays version |
...