...
| Center |
|---|
| Scroll Title |
|---|
| title-alignment | center |
|---|
| title | Unit parameters description |
|---|
| | Parameter | Description |
|---|
| Device Name | The arbitrary wireless unit name which will be used by network administrators for unit identification. It will be shown in Web GUI side panel. | | Link ID | Wireless link identificator used to avoid connecting a unit to a wrong peer if there are several co-located units using the same center frequency. Specify different ID values for different links. Both ends of the same link must have the same ID. |
|
|
| Center |
|---|
| Scroll Title |
|---|
| title-alignment | center |
|---|
| title | Figure - Unit parameters |
|---|
|
 Image Modified
|
SNTP
Starts the SNTP time synchronization service. For proper operation, specify the SNTP server time zone and the IP address first. By default, the SNTP service is disabled.
| Center |
|---|
| Scroll Title |
|---|
| title-alignment | center |
|---|
| title | SNTP parameters description |
|---|
| | Parameter | Description |
|---|
SNTP Server Address
| The SNTP server IP address, the SNTP service will synchronize the time on the device with. The device must have network access to the SNTP server. | Time Zone
| The time zone at the place of device installation. For example: GMT + 5. |
|
|
center |
| Scroll Title |
|---|
| title-alignment | center |
|---|
| title | Figure - SNTP settings |
|---|
|
 Image Modified
|
Syslog
Allows to transmit syslog data to the server using the "syslog" protocol. Specify the syslog server address where data should be transmitted.
...
| Scroll Title |
|---|
| title-alignment | center |
|---|
| title | Figure - Syslog configuration |
|---|
|
 Image Modified
|