In previous
WANFleX firmware versions (till "
MINTv1.8990.0") configuration options "
Management VLAN" ("
local-tag" in
CLI) and "
Admin" ("
admin-group" in
CLI) were used to create logical management interface.
...
That is why InfiNet Wireless has developed SVI and VLAN logical interfaces for MINT firmware. Starting from firmware "MINTv1.90.0" old options “admin-group” and “local-tag” are no longer supported. And if you want to make a management interface, you should use SVI interface approach.
Warning |
---|
|
Please note, that it is necessary to go to the SVI interface in management even if you are using the old firmware versions thru "MINTv1.87.0" and then to perform upgrade to the latest current version. |
In order to avoid a lot of problems with migration, please follow step-by-step migration procedure from old configuration to new one via:
CLI
To use new SVI interface approach "local-tag" and "admin-group" parameters must be disabled. In order to do this please proceed the following steps:
...
Web GUI
Go to the "Basic Settings" page and then to the "MAC Switch" -> "IGMP Snooping" menu.
...
Note |
---|
|
Please note, you can uncheck "Admin" and remove "Management VLAN" value only using firmware version "MINTv1.89.0012" or lower. |
To set up vlan management using SVI and VLAN interfaces please proceed to the "Remote management of the R5000 units" section of "InfiNet Wireless R5000 - Web GUI" - Technical User Manual.