Infinet Wireless: Technical Documentation
Page tree

Versions Compared

Old Version 1

changes.mady.by.user Tatyana Drazhnikova

Saved on

compared with

New Version 2

changes.mady.by.user Tatyana Drazhnikova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

SNMP is a protocol that operates at the Application layer of the OSI reference model and enables the exchange of management information between various networking devices. It has the following advantages:

Simple design

SNMP implementation implementation in any large scale network can be performed quiqly quickly and easily.

Scalability

It is very easy to extend its capabilities and include new information in its structure in order to support any type of device.

...

Enable/disable SNMP v.1 and v.2c support. The first version of the SNMP protocol lacks security in the operation of the protocol itself, which hinders its use for network management, so SNMP v.1 and v.2c always works only in read-only mode. By default, it is enabled.

...

In "SNMP Traps" section is possible to enable/disable to send "SNMP traps", to set the IP address of the device which sends traps; normally it is normally the IP address of the InfiNet Wireless unit. To select traps or trap groups to be sent to the server is enough to mark the check boxes. The traps available to mark depend on the product family, full list of possible values are below:

Center
SNMP trap types
Description

topoGroup

Events about topology changes in MINT network

topoEvent

Number of neighbors or their status has changed (full neighbor list)

newNeighborEvent

The new Neighbor has appeared

lostNeighborEvent

The Neighbor has been lost

radioGroup

Events which are related to changes of radio link parameters

radioFreqChanged

The Frequency has changed

radioBandChanged

The Band has changed

mintGroup

Events about link quality changes in MINT network

mintRetries

Retries has changed by more than 10%

mintBitrate

The Bitrate has changed

mintSignalLevel

Signal Level has changed by more than 10%

ospfGroup

Events about OSPF table changes in MINT network

ospfNBRState

The State of the relationship with this Neighbor has changed

ospfVirtNBRState

The State of the relationship with this Virtual Neighbor has changed

ospfIFState

The State of the OSPF Interface has changed

ospfVirtIFState

The State of the Virtual OSPF Interface has changed

ospfConfigError

Parameters conflict in the configuration of 2 routers

others

Other changes in MINT network

linkEvent

One of the communication links represented in the agent’s configuration has come up or come down

trapdColdStartEvent

Cold Start event has occurred

snmpdAuthenticationFailureEvent

Not properly authenticated SNMP protocol message has been received

syslog

Events about messages recorded in a system log

Center

The MIB structure and object identifiers for the InfiNet Wireless units can be obtained from ftp://ftp.infinet.ru/pub/Firmware/MIBS.  This ensures the Integration of the InfiNet units in any monitoring system (for example a NMS may already exist and include all other network devices owned by a company).