...
Note |
---|
|
Before making the configurations in the "Network Settings" section, please read the information presented in the "InfiMUXMAC MAC Switch" section. |
Center |
---|
Image Removed |
For the following layer 2 and 3 logical interfaces, you are allowed to add (by clicking the corresponding buttons and specifying the interface number), remove and change the parameters of the interface:
...
Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Table - Network Settings |
---|
| Interface type | Operations |
---|
ethX | - Configure the IP address(es) and the mask of the interface
- The IP address(es) of the "ethX" interface is accessible via Ethernet LAN segment only (it won't be accessible via the "rfX" interface from other neighbor unit)
- The IP address(es) of the "ethX" interface is used in the routing process
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
- Set the interface mode (for example: 1000Base-TX-fullduplex) - the default value is “Auto” (recommended)
| rfX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
| sviX | - SVI interface is a logical L3 interface of the switch (solely used for the management of the unit)
- Configure the IP address(es) and the mask of the interface (as the management IP address(es) of the unit)
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically (as the management IP address(es) of the unit)
- DHCP option is disabled by default
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the Switch group number which this interface is assigned to (bind the SVI interface to a switch group)
| prfX | - PRF interface makes the Ethernet interface that it is assigned to, to appear as a regular RF interface in terms of the MINT network (for more information please refer to the WANFleX OS User Manual)
- Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be transmitted the encapsulated packets (assign the PRF interface to the physical Ethernet interface)
- Set the channel number (from 0 to 3) on which the frames are sent and received by the parent interface
- Both PRF interfaces (of the two units in the link) must have the same channel assigned in order to establish the wireless link
| vlanX | - Configure the IP address(es) and the mask of the interface in case you use this interface for the management of the unit, only (not recommended way)
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be transmitted the encapsulated packets
- Configure the VLAN tag (or VLAN ID) for the current interface (from 1 to 4094)
- In the drop-down window, you can select the vlan interface operation mode:
- 802.1q - vlan tag operations are performed according to this standard;
- 802.1ad - double tagging "QinQ";
- 802.1ah - backbone bridge using mac-in-mac technology described by the IEEE 802.1ah-2008 standard.
| lagX | - Link aggregation interface is a logical interface used to combine multiple physical channels into one logical channel in order to increase link capacity and redundancy (for the units with two physical Ethernet ports)
- Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the parent interface to be aggregated the encapsulated packets
- Enable/disable Fast Mode
| tunX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
- Set the tunneling mode: IPIP or GRE
| tapX | - Configure the IP address(es) and the mask of the interface
- Enable/disable the interface
- Enable/disable DHCP - obtain an IP address automatically
- Set the interface description (up to 72 characters)
- Remove the interface
|
|
|
In the "Network Settings" section, "Routing Parameters" zone, you can configure subsection the static routes :
Center |
---|
Image Removed |
...
can be configured.
- “Network” - the destination network IP address.
- “Gateway” - the IP address of the router through which the network address is reachable.
...