...
| Method № 1 Using a wireless access point and power bank. The smartphone is connected to the access point via Wi-Fi. The power bank acts as a power source for both the wireless access point and the Infinet Wireless device. Network connection scheme - with access point. Requirements:
| ||||||||||
| Method № 2 Using a wireless access point with built-in battery and PoE-Out support. The smartphone is connected to the access point via Wi-Fi. The access point has a built-in battery that powers both the access point itself and the Infinet Wireless device. Network connection scheme - with access point. Requirements:
| ||||||||||
| Method № 3 Using a wireless access point with a built-in battery and an external power supply. The smartphone is connected to the access point via Wi-Fi. The access point is connected to a wireless device via a proprietary power injector. The access point has a built-in battery that powers the access point only. The Infinet Wireless device is powered by a proprietary power injector connected to an AC a power source. Network connection scheme - with access point. Requirements:
| ||||||||||
| Method № 4 Using USB ↔ RJ45 wired adapter and external power supply. The smartphone is connected directly to the proprietary power injector via a USB ↔ RJ45 adapter. The Infinet Wireless device is powered by a proprietary power injector connected to an AC a power source. Network connection scheme - without access point. Requirements:
|
...
- The smartphone does not require any additional settings, it will connect to the access point via Wi-Fi, receiving network settings from DHCP service.
- The Infinet Wireless device must be configured in a following way:
- Activate a DHCP server to provide network settings to devices connecting via wired network interface (see dhcpd command (DHCP Server). After alignment this setting must be removed.