Parameter | Description |
---|
start|stop | Starts/stops SNMP Trap agent on the device. |
dst[addr] x.x.x.x[:PORT][/v1|/v2] [[GROUPNAME] ...] [[[-]TYPENAME] ...] | Sets an SNMP server address to the SNMP configuration. Multiple SNMP servers can be set in the configuration. - "[addr] x.x.x.x" – the server’s IP-address.
- ":PORT" – the server’s UDP port (port 162 is used by default).
- "/v1|/v2" – SNMP Trap version (1 or 2), can be specified for each SNMP Trap receiver. Several receivers with different protocol version is possible to create. Version 1 is used by default.
- "GROUPNAME" – groups of Traps to be sent to the server.
- "[-]TYPENAME" – exact Traps to be sent to the server (or exclude from sending if "-" sign is added).
|
-dst[addr] x.x.x.x[:PORT] | Deletes an SNMP server"s IP-address from the configuration. |
map | Displays the allocated SNMP servers (their IP-addresses) and the defined Traps/groups for each server. |
agent x.x.x.x | Sets agent’s own IP-address, which is set in SNMP Trap packet. Default agent’s own IP-address is 127.0.0.1. |
-agent | Deletes the agent’s IP-address from the configuration. |
gateway {xxxxxxxxxxxx|auto} | Allows to send SNMP Traps to the SNMP server via SNMP network agent running on some other device (gateway). - "xxxxxxxxxxxx" – the gateways MAC-address.
- “auto” – SNMP Traps are automatically sent to the MINT SNMP relay, defined by the "mint -snmprelay" command, if it exists in the MINT network.
|
-gateway | Deletes the gateway from the configuration. |
type TYPENAME enable|disable | Allows/rejects sending of different Traps types. All Traps are disabled by default. |
SNMP traps and trap groups supported by the system
|
trapdColdStartEvent | Trap is sent when the unit is powered up. |
snmpdAuthenticationFailureEvent | Trap is sent in case of failure in SNMP authentification. |
syslog | All new messages in the system log are sent as a Trap. |
Group topoGroup |
topoEvent | Full neighbor list is sent in case of any changes in number of neighbors or their status. |
lostNeighborEvent | Trap is sent when a new neighbor appears. |
newNeighborEvent | Trap is sent when the neighbor is lost. |
Group radioGroup |
radioFreqChanged | Trap is sent when frequency is changed. |
radioBandChanged | Trap is sent when channel width is changed |
Group mintGroup |
mintBitrate | Trap is sent when the bitrate is changed. |
mintRetries | Trap is sent if more than 10% retries appear. |
mintSignalLevel | Trap is sent if the signal level is changed by more than 10%. |
Group ospfGroup |
ospfNBRState | Trap is sent when the state of a non-virtual OSPF neighbor is changed. |
ospfVirtNBRState | Trap is sent when the state of a virtual OSPF neighbor is changed. |
ospfIFState | Trap is sent when the state of a non-virtual OSPF interface is changed. |
ospfVirtIFState | Trap is sent when the state of a virtual OSPF interface is changed. |
ospfConfigError | Trap is sent when a packet has been received from a router whose configuration conflicts with this routers configuration. |
linkEvent | Trap is sent when Ethernet state is changing. This trap enables/disables sending two generic SNMP traps: "linkUp" and "linkDown". |