| General System Parameter | Description |
|---|
| Device Name | - You can set the device name
- This parameter is displayed in the web-page header
|
| User Name | - Displays the username (Login) used to access the unit management interfaces
- You can change the current username
|
| Password and Confirm Password | - You can change the password set in the previous configuration only after unmarking the option “keep current system password" in the corresponding checkbox
- You can return to the default settings for "Password" and "User Name" (any values with non-zero length) by unmarking the checkbox “Keep current system password” and leaving the corresponding fields empty and save the configuration at the bottom of the page
|
| WEB Interface language | - You can change the default system language (English) into Russian, French, Italian or Chinese language
|
| HTTPS only | - You can set that all HTTP connections to the unit to perform via HTTPS (HTTP with SSL only) by marking the option “HTTPS only” in the corresponding checkbox
- By default, this option is disabled
|
| Start SNTP | - You can start SNTP service by marking the option “Start SNTP” in the corresponding checkbox
- By default, this option is disabled
- SNTP is necessary for correct time display, for example, in system logs
|
| SNTP Server | - Enable/disable SNTP server
- If enabled, local device operates as an SNTP server
|
| Use GNSS time | - Enable/disable GNSS time
- Disabled by default
|
| SNTP IP Address | - You can set the IP address of a valid SNTP server
- The unit must have an active connection with the SNTP server in order to receive time services
|
| Time Zone | - You can set the time zone in POSIX format. For example: GMT+4
|
| Latitude | - You can set the latitude of the geographical place where the unit is installed
- GPS latitude format is [N/S]YY.YYYYYY
- Use the Google Map feature to automatically fill in this field (follow the indications below)
|
| Longitude | - You can set the longitude of the geographical place where the unit is installed
- GPS longitude format is [E/W]XX.XXXXXX
- Use the Google Map feature to automatically fill in this field (follow the indications below)
|
| Enable GNSS Receiver | - Enable/disable GNSS position
- Disabled by default
|
| Enable Telnet | - Enable/disable device management via CLI using Telnet protocol
|
| Enable SSH | - Enable/disable device management via CLI using SSH protocol
- SSH provides more secure device management than Telnet by encrypting all protocol messages, including transmitted passwords
|
| Access White List | - List of IP addresses for access limitation to the device via telnet, ssh, http/https, snmp protocols (ports 22, 23, 80, 162, 443).
- In case there is at least one address in access list, all attempts to establish a connection with the device from addresses (networks) that are not in this list will be rejected.
|
