Infinet Wireless: Technical Documentation
Page tree

Versions Compared

Old Version 5

changes.mady.by.user Olga Kosareva

Saved on

compared with

New Version 6

changes.mady.by.user Olga Kosareva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Center
Scroll Title
titleFigure - Cable Assembly Scheme

ItemNameItemName
1Cable gland nut5SFP-module (not included in the delivery package)
2Split sealing grommet6Standard RJ-45 connector
3Cable gland threaded coupling7GPS antenna port (antenna and cable are not included in the delivery package)
4Optical cable (from 2mm to 3mm)8Grounding bolt
Warning
titleCAUTION

In order to prevent device damage make sure that antenna is connected to both N-type connectors with serviceable RF cables before switching on.

During laboratory testing, it is allowed to directly connect two devices with RF cables without antennas with the mandatory use of attenuators with attenuation of at least 40 dB for each polarization. Switching off/on the attenuators and RF cables should only be performed when the devices are in the off state.

In case the antenna or other device is connected to only one N-type connector do not switch on the device.

PLEASE NOTE THAT DEVIATION FROM THESE REQUIREMENTS AND ONE OR BOTH CHANNELS FAILURE TO TRANSMIT ARE NOT COVERED BY WARRANTY.