Infinet Wireless: Technical Documentation
Page tree

Versions Compared

Old Version 6

changes.mady.by.user Olga Kosareva

Saved on

compared with

New Version Current

changes.mady.by.user Tatyana Drazhnikova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Include Page
_IW Academy
_IW Academy

Table of Contents

Warning
titleAttentionCAUTION

Configurations from the scenarios below are examples that demonstrate the potential capabilities of the Infinet Wireless devices. The configuration configurations may change vary depending on the model and firmware version. Do We do not recommend copying the solution data this solutions to the hardware without checking.

Description

Link aggregation of radio channels allows increasing the maximum radio throughput. InfiMUX switches can aggregate radio links into a single MINT domain where a capacity of each link will be estimated in real time.

...

Center

...

Image Added

Configuration Example

A management is VLAN 100 inside a in switch group 100#100. A transport of user data is inside a in switch group 1#1.

  • Configure first radio linkMaster 1 and Slave 1 as the main link.

    Code Block
    languagetext
    themeEmacs
    titleMaster 1
    rf rf5.0 band 40
rf rf5.0 mimo
rf rf5.0 freq 5000 bitr 300000 sid 10101010 burst
rf rf5.0 txpwr 25 pwrctl distance auto
dfs rf5.0 dfsoff
mint rf5.0 -roaming leader
mint rf5.0 -type master
mint rf5.0 -name "Master 1"
mint rf5.0 -key "123456789"
mint rf5.0 poll start
ifc svi100 up
ifc vlan100 vlan 100 vlandev svi100eth0 up
ifc vlan100 192.168.1.1/24
sw group 100 add prf0vlan100 rf5.0
svi 100 group 100
swifc group 100 stp onsvi100 192.168.1.1/24
sw group 100 start
    Code Block
    languagetext
    themeEmacs
    titleSlave 1
    rf rf5.0 band 40
rf rf5.0 mimo
rf rf5.0 burst
dfs rf5.0 dfsoff
mint rf5.0 prof 1 -band 40 -freq 5000 -bitr 300000 -sid 10101010 -nodeid 00020 -type slave -netid 0 -minbitr 30000 -autobitr -mimo -key "123456789"
mint rf5.0 -name "Slave 1"
ifc svi100 up
ifc vlan100 vlan 100 vlandev svi100eth0 up
ifc vlan100 192.168.1.2/24
sw group 100 add vlan100 prf0rf5.0
svi 100 group 100
swifc group 100 stp onsvi100 192.168.1.2/24
sw group 100 start

  • Configure second radio linkMaster 2 and Slave 2 as a backup link.

    Code Block
    languagetext
    themeEmacs
    titleMaster 2
    rf rf5.0 band 40
rf rf5.0 mimo
rf rf5.0 freq 5100 bitr 300000 sid 10101010 burst
rf rf5.0 txpwr 25 pwrctl distance auto
dfs rf5.0 dfsoff
mint rf5.0 -roaming leader
mint rf5.0 -type master
mint rf5.0 -name "Master 2"
mint rf5.0 -key "123456789"
mint rf5.0 poll start
ifc svi100 up
ifc vlan100 vlan 100 vlandev svi100eth0 up
ifc vlan100 192.168.1.3/24
sw group 100 add prf0vlan100 rf5.0
svi 100 group 100
swifc group 100 stp onsvi100 192.168.1.3/24
sw group 100 start
    Code Block
    languagetext
    themeEmacs
    titleSlave 2
    rf rf5.0 band 40
rf rf5.0 mimo
rf rf5.0 burst
dfs rf5.0 dfsoff
mint rf5.0 prof 1 -band 40 -freq 5100 -bitr 300000 -sid 10101010 -nodeid 00040 -type slave -netid 0 -minbitr 30000 -autobitr -mimo -key "123456789"
mint rf5.0 -name "Slave 2"
ifc svi100 up
ifc vlan100 vlan 100 vlandev svi100eth0 up
ifc vlan100 192.168.1.4/24
sw group 100 add vlan100 prf0rf5.0
svi 100 group 100
swifc group 100 stp onsvi100 192.168.1.4/24
sw group 100 start

  • Configure InfiMUX switches.

    Code Block
    languagetext
    themeEmacs
    titleInfiMUX 1
    ifc svi100 up
ifc vlan100 vlan 100 vlandev eth0 up
sw group 100 add vlan100 prf0
svi 100 group 100
ifc svi100 192.168.1.5/24
switch group 100 order 1
sw group 100 stp on
sw group 100 start
ifc prf0 up
prf 0 parent eth1
mint prf0 -name "InfiMux 1 prf 1"
mint prf0 -nodeid 00090
mint prf0 -type master
mint prf0 -mode fixed
mint prf0 -key "123456789"
mint prf0 -authmode public
mint prf0 start
ifc prf1 up
prf 1 parent eth2
mint prf1 -name "InfiMux 1 prf 2"
mint prf1 -nodeid 00100
mint prf1 -type master
mint prf1 -mode fixed
mint prf1 -key "123456789"
mint prf1 -authmode public
mint prf1 start
mint join prf0 prf1
lag 0 mode fast port eth1 eth2
ifc lag0 up
    Code Block
    languagetext
    themeEmacs
    titleInfiMUX 2
    ifc svi100 up
ifc vlan100 vlan 100 vlandev eth0 up
sw group 100 add vlan100 prf0
svi 100 group 100
ifc svi100 192.168.1.6/24
switch group 100 order 1
sw group 100 stp on
sw group 100 start
ifc prf0 up
prf 0 parent eth1
mint prf0 -name "InfiMux 2 prf 1"
mint prf0 -nodeid 00110
mint prf0 -type master
mint prf0 -mode fixed
mint prf0 -key "123456789"
mint prf0 -authmode public
mint prf0 start
ifc prf1 up
prf 1 parent eth2
mint prf1 -name "InfiMux 2 prf 2"
mint prf1 -nodeid 00120
mint prf1 -type master
mint prf1 -mode fixed
mint prf1 -key "123456789"
mint prf1 -authmode public
mint prf1 start
mint join prf0 prf1
lag 0 mode fast port eth1 eth2
ifc lag0 up

  • Create united MINT domain.

    Code Block
    languagetext
    themeEmacs
    titleMaster 1
    ifc prf0 up
prf 0 parent eth0
mint prf0 -name "Master 1 prf"
mint prf0 -nodeid 00050
mint prf0 -type master
mint prf0 -mode fixed
mint prf0 -key "123456789"
mint prf0 -authmode public
mint prf0 start
mint join rf5.0 prf0
    Code Block
    languagetext
    themeEmacs
    titleSlave 1
    ifc prf0 up
prf 0 parent eth0
mint prf0 -name "Slave 1 prf"
mint prf0 -nodeid 00060
mint prf0 -type master
mint prf0 -mode fixed
mint prf0 -key "123456789"
mint prf0 -authmode public
mint prf0 start
mint join rf5.0 prf0
    Code Block
    languagetext
    themeEmacs
    titleMaster 2
    ifc prf0 up
prf 0 parent eth0
mint prf0 -name "Master 2 prf"
mint prf0 -nodeid 00070
mint prf0 -type master
mint prf0 -mode fixed
mint prf0 -key "123456789"
mint prf0 -authmode public
mint prf0 start
mint join rf5.0 prf0
    Code Block
    languagetext
    themeEmacs
    titleSlave 2
    ifc prf0 up
prf 0 parent eth0
mint prf0 -name "Slave 2 prf"
mint prf0 -nodeid 00080
mint prf0 -type master
mint prf0 -mode fixed
mint prf0 -key "123456789"
mint prf0 -authmode public
mint prf0 start
mint join rf5.0 prf0

  • Configure switch groups.

    Warning
    titleAttentionCAUTION

    The number of the switching group number for the data transmission transmission on Master 2 and Slave 2 devices2 must differ from the group number of such a group on the devices Master1 and Slave 1, or it might cause the loop.

    Code Block
    languagetext
    themeEmacs
    titleMaster 1
    switch group 1 add eth0 prf0
sw group 1 repeater on
switch group 1 start
    Code Block
    languagetext
    themeEmacs
    titleSlave 1
    switch group 1 add eth0 prf0
sw group 1 repeater on
switch group 1 start
    Code Block
    languagetext
    themeEmacs
    titleMaster 2
    switch group 2 add eth0 prf0
sw group 2 repeater on
switch group 2 start
    Code Block
    languagetext
    themeEmacs
    titleSlave 2
    switch group 2 add eth0 prf0
sw group 2 repeater on
switch group 2 start
    Code Block
    languagetext
    themeEmacs
    titleInfiMUX 1
    switch group 1 add eth0 lag0
switch group 1 start
    Code Block
    languagetext
    themeEmacs
    titleInfiMUX 2
    switch group 1 add eth0 lag0
switch group 1 start