Warning |
---|
|
Configurations from the scenarios below are examples that demonstrate the potential capabilities of Infinet the InfiNet Wireless devices. The configuration configurations may change vary depending on the model and firmware version. Do We do not recommend copying the solution data this solutions to the hardware without checking. |
Description
Infinet nfiLINK XG/InfiLINK XG 1000 devices do not have software functionality for redundant links. However, you can create two redundant links on them with using third-party devices based on public technologies.
The simplest scheme will be the organization of two links established at the 3 level of OSI via two InfiLINK XG/InfiLINK XG 1000 devices. OSPF protocol excludes loops and allows to increase throughput.
Unfortunately, in this case, the use of one frequency for two pairs of devices is not desirable.
Center |
---|
Image Modified |
Conceptual scheme
Configuration Example
Configure first radio linkMaster 1 and Slave 1 as the main link.
Code Block |
---|
language | text |
---|
theme | Emacs |
---|
title | Master 1 |
---|
|
xg -type master
xg -tdd-sync-src freerun
xg -cell-id 1
xg -channel-width 40
xg -freq-dl 5000
xg -freq-ul 5000
xg -short-cp 1
xg -freq-auto 0
xg -max-distance 1
xg -sframelen 5
xg -tdd-profile-auto-switching 1
xg -txpwr 0
xg -ctrl-block-boost 1
xg -atpc-master-enable 1
xg -atpc-target-rssi -55
xg -atpc-rssi-threshold 1 |
Code Block |
---|
language | text |
---|
theme | Emacs |
---|
title | Slave 1 |
---|
|
xg -type slave
xg -tdd-sync-src freerun
xg -cell-id 1
xg -channel-width 40
xg -freq-dl 5000
xg -freq-ul 5000
xg -short-cp 1
xg -freq-auto 0
xg -max-distance 1
xg -sframelen 5
xg -tdd-profile-auto-switching 1
xg -txpwr 0
xg -ctrl-block-boost 1
xg -atpc-master-enable 1
xg -atpc-target-rssi -55
xg -atpc-rssi-threshold 1 |
Configure second radio linkMaster 2 and Slave 2 as a backup link.
Code Block |
---|
language | text |
---|
theme | Emacs |
---|
title | Master 2 |
---|
|
xg -type master
xg -tdd-sync-src freerun
xg -cell-id 2
xg -channel-width 40
xg -freq-dl 5100
xg -freq-ul 5100
xg -short-cp 1
xg -freq-auto 0
xg -max-distance 1
xg -sframelen 5
xg -tdd-profile-auto-switching 1
xg -txpwr 0
xg -ctrl-block-boost 1
xg -atpc-master-enable 1
xg -atpc-target-rssi -55
xg -atpc-rssi-threshold 1 |
Code Block |
---|
language | text |
---|
theme | Emacs |
---|
title | Slave 2 |
---|
|
xg -type slave
xg -tdd-sync-src freerun
xg -cell-id 2
xg -channel-width 40
xg -freq-dl 5100
xg -freq-ul 5100
xg -short-cp 1
xg -freq-auto 0
xg -max-distance 1
xg -sframelen 5
xg -tdd-profile-auto-switching 1
xg -txpwr 0
xg -ctrl-block-boost 1
xg -atpc-master-enable 1
xg -atpc-target-rssi -55
xg -atpc-rssi-threshold 1 |
- Configure OSPF (not included in the example).