Cable Gland Assembly for RJ-45 connector
Note |
---|
|
The outside diameter value of the FTP Cat5e cable should not exceed 7 mm. |
Assemble procedure (except Q5-18, Q6-18)
Anchor |
---|
| Assemble procedure |
---|
| Assemble procedure |
---|
|
Required components are listed below.
- Unshielded RJ-45 connector.
- Shielded RJ-45 connector.
- FTP Cat5e cable.
- Cable gland:
- Cable gland nut.
- Split sealing grommet (with inner diameter 7 mm).
- Cable gland threaded coupling.
- Crimping tool for RJ-45 connector.
In order to ensure that the device case remains sealed under any environmental conditions follow the assemble procedure:
...
Assemble procedure
- Step 1: Put Put the cable gland nut, the split sealing grommet and cable gland threaded coupling onto the pre-terminated optical cable as shown on the figure belowgland threaded coupling onto the optical cable.
- Step 2: Insert the split sealing grommet into the cable gland threaded coupling.
- Step 3: Set the SFP module into the socket until you hear a click.
- Step 4: Insert the optical connector into the SFP module.
- Step 5: Screw the cable gland threaded coupling into the port and tighten it.
- Step 6: Tighten the cable gland nut. Do not apply excessive force.
...