| Parameter | Description |
|---|
| Status | - Gives a color indication for the wireless connection quality with the neighbor unit:
- Red: poor connection
- Yellow: good connection
- Green: excellent connection
- Link Uptime. Displays the link uptime
- F - – relevance of remote unit firmware (optional). Idicates that the remote unit has the older firmware than the local one
- ? - – system password of the remote unit (optional).Idicates that the remote unit has not the system password
- E – Ethernet port status on the remote device (optional). Indicates that the remote device Ethernet port is flapping.
|
| MAC Address | - Displays the neighbor’s MAC address
|
| Name | - Displays the neighbor’s name
|
| Node ID | - Displays the sequential number of the neighboring node
|
| Distance | - Displays the calculated (theoretical) distance to the neighbor unit (in Km)
|
| Tx Power | - Displays the power level of the Tx and Rx signals of the neighbor unit (in dBm)
|
| SNR | - Displays the ratio of the useful signal power to the noise power for the input and output signals at the neighbor unit (in dB)
|
| Current Level | - Displays the Tx and Rx signals levels for current bitrate of the neighbor unit (in dB)
|
| Bitrate | - Displays the set bitrate value for the Tx and Rx signals of the neighbor unit
|
| Retries | - Displays the percentage of Tx and Rx retries of the neighbor unit
|
| Errors | - Displays the percentage of Tx and Rx errors of the neighbor unit
|
| Load | - Displays the number of kbps and packets that are going inbound and outbound the radio interface of the neighbor unit (main data)
|