Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Here you may change system administrator account login and password, to change the identification data, click the "Change admin password" button. We strongly recommend you to set a login and password after the first login to the device.

Center
Scroll Title
title-alignmentcenter
titleFigure - Admin access

Image Modified

Radius AAA

Here you may configure a device access control using a remote RADIUS server.

Center
Scroll Title
title-alignmentcenter
titleRadius server parameters description
ParameterDescription
AddressSet the RADIUS server IP address.
Port

Set the RADIUS server port.

Secret

Set the server password.

Center
Scroll Title
title-alignmentcenter
titleFigure - RADIUS parameters

Image Modified

Command line interface

Allows to enable / disable remote device control by the command line using Telnet and SSH protocols.

SSH (Secure Shell) protocol provides secure remote control to network devices. Its functionality is similar to the Telnet protocol, but, unlike Telnet, SSH encodes all protocol messages, including transmitted passwords. By default, only access via Telnet is enabled.

...

Scroll Title
title-alignmentcenter
titleFigure - Access protocols

Image Modified

Network access

This section is used to create a list of subnets from which access to the device will be allowed.

Center
Scroll Title
title-alignmentcenter
titleFigure - Network access

Image Modified

Radio authentication settings

Units at both ends of the wireless link should authorize each other before link establishment. Access key must be up to 64 characters long, without spaces and must be the same at both ends of the link.

...

Scroll Title
title-alignmentcenter
titleUnit parameters description

Image Modified