...
The wireless device contains both the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment this equipment can be used to create point-to-point wireless links at distances in excess of 10 20 km (depending on weather conditions, interference, terrain, climate zones, etc.). The wireless device is supplied in the following the following configuration: integrated lens
...
- 39 dBi gain.
- Cassegrain antenna with 50 dBi gain.
Lens antenna
Center |
---|
Gliffy Diagram |
---|
displayName | Q70_equipment |
---|
name | Q70_equipment |
---|
pagePin | 4 |
---|
|
|
Cassegrain antenna
Center |
---|
Gliffy Diagram |
---|
| |
---|
name | Q70-50 Hardware |
---|
pagePin | 21 |
---|
|
|
Grounding bolt
For grounding the wireless device to the supporting structure.
...
Center |
---|
LED | State | Status | Description |
---|
RSSI | Number | RX Signal value | Values on the RSSI LED are displayed in negative (-) dBm. For example, 90 represents a received signal level of -90 dBm. Lower values indicate stronger received signal levels. |
---|
— — | Wireless link is not established | Gigabit Ethernet SFP | Flash | Initialization | The LEDs on both ports light up with white on second. Then LEDs check is performed: red, blue, green are lightened up sequentially. |
---|
Flash | Loading | Only for Gigabit Ethernet port: at the beginning green is lightened a few seconds, on the second loading stage switches to blue. | ON/Blue | Power | Only for Gigabit Ethernet port. | ON/Red | Speed 10 Mbps | Only for Gigabit Ethernet port. | ON/Yellow | Speed 100 Mbps | Only for Gigabit Ethernet port. | ON/Green | Speed 1000 Mbps |
| ON/Green | ERConsole stage | Port with the established link lights up with green, the second port remains blue. |
|
Center |
---|
Gliffy Diagram |
---|
displayName | Ethernet Indication |
---|
name | Ethernet Indication |
---|
pagePin | 67 |
---|
|
|
Part number description
Include Page |
---|
| _Quanta 70 Numbering convention |
---|
| _Quanta 70 Numbering convention |
---|
|