Usually, before going into the field, it is recommended to pre-configure in the lab the Infinet Wireless units to verify the link establishment. Take the units out of the package and place them on the table.
...
- Connect Gigabit Ethernet port at the ODU to the power supply port labeled as "OUT".
- Connect Ethernet port at the laptop to the power supply port labeled as "IN".
- Connect the power cord to power supply and plug it to AC mains.
Center |
---|
Gliffy Diagram |
---|
size | 750 |
---|
| |
---|
name | Quanta 70 preconfig |
---|
pagePin | 5 |
---|
|
|
Step 2: Access to the device
...
Go to the "Settings" → "Security" section and configure login and password.
Center |
---|
Image RemovedImage Added
|
Note |
---|
|
At the next login set up login and password to access the unit in the privileged mode. |
...
- Download latest release from the FTP server ftphttps://ftp.Infinet.ru/pub/Firmware.
- In the "Maintenance" section click the "Select file" button and set the path to the downloaded file, or drug it to the specified area.
- File will be uploaded to the device. Changes will be applied after reboot.
Center |
---|
Image RemovedImage Added |
Step 4: Radio parameters configuration
...
Let's apply all settings described above for each unit and go to the "Dashboard" section and check if the device status has changed to "Connected".
Center |
---|
Image RemovedImage Added |