...
Here you may change system administrator account login and password, to change the identification data, click the "Change admin password" button. We strongly recommend you to set a login and password after the first login to the device.
Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Figure - Admin access |
---|
| 
|
|
Radius AAA
Here you may configure a device access control using a remote RADIUS server.
Center |
---|
Scroll Title |
---|
|
title | Radius server parameters description |
---|
|
Parameter | Description |
---|
Address | Set the RADIUS server IP address. |
Port | Set the RADIUS server port. |
Secret | Set the server password. |
Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Figure - RADIUS parameters |
---|
| 
|
|
...
SSH (Secure Shell) protocol provides secure remote control to network devices. Its functionality is similar to the Telnet protocol, but, unlike Telnet, SSH encodes all protocol messages, including transmitted passwords. By default, only access via Telnet is enabled.
Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Figure - Access protocols |
---|
| 
|
|
Network access whitelist
This section is used to create a list of subnets from which access to the device will be allowed.
Center |
---|
Scroll Title |
---|
title-alignment | center |
---|
title | Figure - Network access |
---|
| 
|
|
Radio authentication settings
Units at both ends of the wireless link should authorize each other before link establishment. Access key must be up to 64 characters long, without spaces and must be the same at both ends of the link.
Center |
---|
scroll-title |
---|
title-alignment | center |
---|
title | Unit parameters description |
---|
| 
|
|