The graphical antenna alignment tool allows to visualize the signal characteristics on both sides of the link in order to make the antenna alignment process more accurate and easier.
...
| Center |
|---|
| Scroll Title |
|---|
| title | Table - CINR, RSSI and RSSI Crosstalk value ranges |
|---|
| | CINR (dB) |
|---|
| - Very low quality signal suitable for low-order modulations only. It is highly recommended to improve signal quality by selecting less congested channel or increasing signal level
| | - Low signal quality, average modulations are available
| | | | - Very good quality signal suitable for highest-order modulations
| | RSSI (dBm) |
|---|
| -90…-80 | - Close to the receiver sensitivity level, suitable only for the lowest modulation levels; it is highly recommended to improve signal level or switch to narrower available channel width in order to avoid the loss of connectivity
| | -80…-60 | | | -60…-40 | - The recommended range for achieving best performance
| | >-40 | - Input signal level is too high, it is recommended to decrease the Tx power in order to avoid possible damage of the radio module of the remote unit
| | Crosstalk (dB) |
|---|
| >20 | |
|
|