...
Check the network connectivity between the monitoring server and the local unit. If no connectivity appear, go on site to the local unit location. Check if it is powered on, power indicator has four possible states: blue – the power is on, red – 10 Mbps wired connectionblue color, wired connection: red – 10 Mbps, yellow – 100 Mbps wired connectionMbps, green – 1000 Mbps wired connectionMbps. If there is no power please check the AC power supply, the Ethernet cables and connector. Check if the local connection works by using a laptop or ERConsole.
...
Step 1: Check the weather conditions
The 70 71-76 GHz frequency range is sensible to the weather condition changes, rain, snow and fog can significantly affect the wireless connection quality.
...
In case the wireless link is down even if the parameters were set according with the radio planning results, go on site to the location of the remote unit. Check if it is powered on, power indicator has four possible states: blue – the power is on, red – 10 Mbps wired connection, yellow – 100 Mbps wired connectionblue color, wired connection: red – 10 Mbps, yellow – 100 Mbps, green – 1000 Mbps wired connectionMbps. If there is no power supply please check the AC power supply, the Ethernet cables and connector. Check Check if the local connection works by using a laptop or ERConsole.
...
Step 1: Check the weather conditions
The 70 71-76 GHz frequency range is sensible to the weather condition changes, rain, snow and fog can significantly affect the wireless connection quality.
...