...
Let's look at an example of routing information redistribution from the ODR protocol to the OSPF protocol, using the network scheme described in the main document (Figure 1).
Center |
---|
Figure 1 - Route redistribution from ODR to OSPF |
...
Description | Configure the ODR protocol: Step 1: launch the ODR protocol on the rf5.0 radio interfaces of the BS2 and CPE3 routers. BS2 will be configured as hub, CPE3 - as spoke. Step 2: advertise the directly connected networks on the CPE3 router. | |||||||
---|---|---|---|---|---|---|---|---|
BS1 | No changes are required. | |||||||
BS2 |
| |||||||
CPE3 |
|
...
Let's look at an example of routing information redistribution from RIP to OSPF using the scheme described in the main document (Figure 2).
Center |
---|
Figure 2 - Route redistribution from RIP to OSPF |
...