Infinet Wireless: Technical Documentation
Page tree

Versions Compared

Old Version 7

changes.mady.by.user Tatyana Drazhnikova

Saved on

compared with

New Version Current

changes.mady.by.user Tatyana Drazhnikova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Let's look at an example of routing information redistribution from the ODR protocol to the RIP protocol using the scheme described in the main document (Figure 1).

Center

Image RemovedImage Added

Figure 1 - Route redistribution from ODR to RIP

...

Description

Configure ODR:

Step 1: launch the ODR protocol on the rf5.0 radio interfaces of the BS2 and CPE3 routers. BS2 will be configured as hub, CPE3 - as a spoke.

Step 2: advertise the directly connected networks on the CPE3 router.

BS1No changes are required.
BS2
Code Block
languagetext
themeEmacs
Start ODR:
mint rf5.0 -odr hub
CPE3
Code Block
languagetext
themeEmacs
Start ODR:
mint rf5.0 -odr spoke

Advertise the directly connected networks:
mint rf5.0 -odr spoke connected

...

Let's look at an example of routing information redistribution from OSPF to RIP using the scheme described in the main document (Figure 2).

Center

Image RemovedImage Added

Figure 2 - Route redistribution from OSPF to RIP

...