...
In case that the MINT software version is installed on the devices, make sure that the "Polling" mode is enabled. This mode improves the efficiency of the radio medium usage and avoids collisions. In addition, to improve the wireless system's efficiency, we recommend updating to the software version having support for the TDMA technology. A detailed description and the benefits of each software version can be found in the "TDMA and Polling: Application features" article.
...
The "Greenfield" mode allows to reduce the frame preamble during the transmission over a wireless connection, increasing the link performance by 10-15%.
...
To keep a balance between the wireless link's performance and the retries number, we recommend always to set always set the "Bitrate" parameter to "Auto" mode. Also set up enable the automatic transmit power control (ATPC) in order to increase the operational life of the devices.
...
If the device has a software version with TDMA technology support, make sure that the used selected frame size ensures the best performance for your wireless system. A short frame will transmit less payload than a long one, however it ensures a smaller delay. A detailed description of the frames frame sizes in the TDMA technology is available in the "TDMA and Polling: Application features" article.
...