Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note
titleNOTE

 Before making the configurations in the "Network Settings" section, please read the information presented in the "MAC Switch⁣" section.

Image Added

For the following layer 2 and 3 logical interfaces, you are allowed to add (by clicking the corresponding buttons and specifying the interface number), remove and change the parameters of the interface:

...

Center
Scroll Title
title-alignmentcenter
titleTable - Network Settings

Scroll Table Layout
widths20%, 80%

Interface typeOperations
ethX
  • Configure the IP address(es) and the mask of the interface
  • The IP address(es) of the "ethX" interface is accessible via Ethernet LAN segment only (it won't be accessible via the "rfX"  interface from other neighbor unit)
  • The IP address(es) of the "ethX" interface is used in the routing process
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • DHCP option is disabled by default
  • Set the interface description (up to 72 characters)
  • Set the interface mode (for example: 1000Base-TX-fullduplex) - the default value is “Auto” (recommended)
rfX
  • Configure the IP address(es) and the mask of the interface
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • DHCP option is disabled by default
  • Set the interface description (up to 72 characters)
sviX
  • SVI interface is a logical L3 interface of the switch (solely used for the management of the unit)
  • Configure the IP address(es) and the mask of the interface (as the management IP address(es) of the unit)
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically (as the management IP address(es) of the unit)
    • DHCP option is disabled by default
  • Set the interface description (up to 72 characters)
  • Remove the interface
  • Set the Switch group number which this interface is assigned to (bind the SVI interface to a switch group)
prfX
  • PRF interface makes the Ethernet interface that it is assigned to, to appear as a regular RF interface in terms of the MINT network (for more information please refer to the WANFleX OS User Manual)
  • Configure the IP address(es) and the mask of the interface
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • Set the interface description (up to 72 characters)
  • Remove the interface
  • Set the parent interface to be transmitted the encapsulated packets (assign the PRF interface to the physical Ethernet interface)
  • Set the channel number (from 0 to 3) on which the frames are sent and received by the parent interface
  • Both PRF interfaces (of the two units in the link) must have the same channel assigned in order to establish the wireless link
vlanX
  • Configure the IP address(es) and the mask of the interface in case you use this interface for the management of the unit, only (not recommended way)
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • Set the interface description (up to 72 characters)
  • Remove the interface
  • Set the parent interface to be transmitted the encapsulated packets
  • Configure the VLAN tag (or VLAN ID) for the current interface (from 1 to 4094)
  • In the drop-down window, you can select the vlan interface operation mode:
    • 802.1q - vlan tag operations are performed according to this standard;
    • 802.1ad - double tagging "QinQ";
    • 802.1ah - backbone bridge using mac-in-mac technology described by the IEEE 802.1ah-2008 standard.
lagX
  • Link aggregation interface is a logical interface used to combine multiple physical channels into one logical channel in order to increase link capacity and redundancy (for the units with two physical Ethernet ports)
  • Configure the IP address(es) and the mask of the interface
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • Set the interface description (up to 72 characters)
  • Remove the interface
  • Set the parent interface to be aggregated the encapsulated packets
  • Enable/disable Fast Mode
tunX
  • Configure the IP address(es) and the mask of the interface
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • Set the interface description (up to 72 characters)
  • Remove the interface
  • Set the tunneling mode: IPIP or GRE
tapX
  • Configure the IP address(es) and the mask of the interface
  • Enable/disable the interface
  • Enable/disable DHCP - obtain an IP address automatically
  • Set the interface description (up to 72 characters)
  • Remove the interface

...

  • “Network” - the destination network IP address.
  • “Gateway” - the IP address of the router through which the network address is reachable.

...

  • .