Page History

The "Maintenance" menu section allows you to perform service tasks for the device maintenance and to check the hardware and software version, reason for the last reboot, system uptime, current configuration, license, diagnostic card, etc.

"Maintenance" page has the following sections:

Firmware

...

Image Added

...

SSL certificate installation

...

1. Download SSL certificate by clicking the "Install Certificate for upgrade firmware via SSL" link. Please note, this link is available if you connect to the Web GUI via HTTPS only.

2. Open the "Chrome Settings" section and click on the "Manage certificates" button.

   Center
   Scroll Title title-alignment center title Figure – Google Chrome Settings

3. Click the "Import..." button to launch Certificate Import Wizard.

4. Follow the wizard's instructions and choose the file to be imported. Click the "Browse..." button and choose the SSL certificate that you have downloaded before. Click the "Next" button to proceed.

   Center
   Scroll Title title-alignment center title Figure – Certificate Import Wizard

5. In the next step it is necessary to select the repository where certificate will be placed. All new certificates are installed into the personal repository by default, click on the "Browse..." button and select "Trusted Root Certification Authorities". Click the "Next" button to proceed.

   Center
   Scroll Title title-alignment center title Figure – Certificates store selection

6. Final step is to check all the provided information. Click the "Finish" button if it's correct. The security warning will appear, click the "Yes" button to confirm you really want to install the certificate.

   Center
   Scroll Title title-alignment center title Figure – Installation confirmation

Firmware update

The system checks automatically for the firmware updates on the InfiNet Infinet Wireless repository and displays a warning message for 10s at each login to the Web interface if a new software version is available:

• In case of new software version availability, after clicking the

...

• "Check Latest

...

• Release" button, the system provides the following options

...

...

• .

Image Added

• By clicking the "Upgrade Firmware" button, the system starts the firmware upgrade process automatically

...

...

• . After the firmware upgrade process ends, you have to reboot the unit before using the new software version

...

• .
• By clicking the

...

• "Save New

...

• Firmware" button, you download the new firmware file locally on your PC.
• If no new firmware version is available, the system provides a full change log for the latest firmware release after clicking the

...

• "Check Latest

...

• Release" button. The process above is the same in case of

...

• beta firmware version. Click the

...

• "Check Latest

...

• Beta" button for it.

Mass firmware upgrade

Each device has the ability to mass firmware upgrade using OTA (Over the Air) function. The firmware can be distributed to:

...

1. Download the required firmware version from the official FTP server (ftp://ftp.infinetwireless.com).

2. Choose the downloaded firmware file in the "Upload" section. Enable OTA function. Enable "Neighbors only" in case you want to upgrade only the neighbor devices.

   center

   Image Added

   Image Removed

3. Click the "Upload" button. The mass upgrade process will be started.

Mass upgrade monitoring

The mass upgrade progress can be seen in the System Log (Device Status section): the number of upgraded devices and progress.The  The remote devices will be rebooted after upgrade completion. The connection failure duration is approximately 35-40 seconds per device.

...

Upload

The "Upload" section allows you to upload other license, firmware and configuration files to the unit.For  For each of the three options, click the «Choose File» "Choose File" button, followed by the «Upload» "Upload" button after the file has been picked up.After  After clicking the «Upload» "Upload" button, the system performs three operations: uploading, saving and validating the new file uploaded and indicates if each of the operation succeeded or failed. In case that the process succeeded, you have to reboot the unit in order to apply the new changes.

Download

The "Download" section allows you to download locally, to the management PC, the current license, firmware and configuration files, by clicking the corresponding buttons: «Download License», «Download Firmware» and «Download Configuration»"Download License", "Download Firmware" and "Download Configuration".

Bottom section of the page

The following buttons are available:

• «Reboot» "Reboot" - reboots the device. A warning message pops up asking for the permission before the operation to start. During the restart process, you are redirected to the login page and the timeout period of 35 seconds counts down before the new login:

• «Restore Factory Settings» .
• "Restore Factory Settings" - restores the factory default configuration. A warning message pops up, asking for the permission before the operation to start. During the reset to factory process, you are redirected to the login page and the timeout period of 30 seconds counts down before the new login:.
•  «View "View Current License» License" - shows the current device license parameters in a new window.
• «View Current Configuration»  "View Current Configuration"  - shows the current device configuration in text format in a new window.
• «Create "Create Diagnostic Card» Card" - Tech Support Reports Generator. By clicking this button, the system downloads to the local PC a text file that contains the complete information (for the technical support specialists) set from the device such as: full device configuration listing, system log output, license information, “mint “mint map detail” detail” command output, interfaces statistics, etc.