| Parameter | Description |
|---|
| Status | - Gives a color indication for the wireless connection quality with the neighbor unit:
- Red: poor connection
- Yellow: good connection
- Green: excellent connection
- Remote device's interface role:
- Link Uptime. Displays the link uptime
- F – relevance of remote unit firmware (optional). Idicates that the remote unit has the older firmware than the local one
- ? – system password of the remote unit (optional).Idicates that the remote unit has not the system password
- E – Ethernet port status on the remote device (optional). Indicates that the remote device Ethernet port is flapping
|
| MAC Address | - Displays the neighbor’s MAC address
|
| Name | - Displays the neighbor’s name
|
| Node ID | - Displays the sequential number of the neighboring node
|
| Distance | - Displays the calculated (theoretical) distance to the neighbor unit (in Km)
|
| Tx Power | - Displays the power level of the Tx and Rx signals of the neighbor unit (in dBm)
|
| SNR | - Displays the ratio of the useful signal power to the noise power for the input and output signals at the neighbor unit (in dB). For radio link stable operation, the SNR value must in the range of 12-50 dB, higher modulation are available at values of 27-50 dB
|
| Current Level | - Displays the Tx and Rx signals levels for current bitrate of the neighbor unit (in dB)
|
| Bitrate | - Displays the set bitrate value for the Tx and Rx signals of the neighbor unit
|
| Retries | - Displays the percentage of Tx and Rx retries of the neighbor unit
|
| Errors | - Displays the percentage of Tx and Rx errors of the neighbor unit
|
| Load | - Displays the number of kbps and packets that are going inbound and outbound the radio interface of the neighbor unit (main data)
|