Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.
Description
Telnet daemon makes it possible to remotely configure and manage a router, and more generally to execute any operation system commands in the same way as it is done through the console port.
Telnet daemon starts automatically when the router is switched on.
Syntax:
td {enable | disable} RHOST[/MASKLEN]
td start | stop | flush | [no]log
Parameters
| Parameters | Description |
|---|---|
| stop | Stops the daemon operation. |
| start | Restarts the daemon. |
| enable RHOST[/MASKLEN] | Remote Telnet access becomes only possible from the explicitly specified IP-addresses (one host specified per each "td enable" command, up to 10 hosts enabled at the same time).
|
| disable RHOST[/MASKLEN] | Retires from a remote host a previously granted access authorization. |
| flush | Fully clears the current telnet daemon configuration. |
| [no]log | Enables / disables the message recording at the system log. |
Examples
Set an IP-address "195.38.44.1" as the only one from which access to the system will be permitted. td enable 195.38.44.1 |