Cable Gland Assembly
NOTE
Cable gland can be assembled on pre-crimped cable.
NOTE
Do not use the shielded RJ-45 connector on this end of the cable as it should be attached on the IDU end.
CAUTION
MAKE SURE THAT THE RJ-45 CONNECTOR IS WELL-CRIMPED. A LOOSE CONNECTOR CAN DAMAGE THE DEVICE. PLEASE NOTE THAT SUCH DAMAGE IS NOT COVERED BY THE WARRANTY.
Cable Gland Assembly for Optical Cable
NOTE
In order to disassemble SFP, please disconnect the optical cable, pull the clip of the SFP-module and withdraw the SFP-module from the slot.