Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

InfiLINK XG is a proprietary system designed to meet the highest performance standards at sub-7 GHz frequency bands (from 4.9 to 6.4 GHz). It is a high capacity Point-to-Point solution, reaching a peak of 500 Mbps of net throughput in 40 MHz of spectrum and more than 130 Mbps in only 10 MHz. It has superior spectral efficiency of up to 13 bps/Hz and it supports high order modulations, such as QAM256 and QAM1024.

InfiLINK XG has full support for internal synchronization either via built-in GLONASS/GPS receiver or via IEEE1588 PTP, making it ideal for applications with tight synchronization constraints like small cell backhauling. Additionaly, a very low constant latency of 0.5 ms is supported for 2 ms air frame period and up to 3 ms for longer air frame period. 

NOTE

Product technical specifications can be obtained from our web site at: http://infinetwireless.com/products/infilink-xg

Available with a wide range of integrated antennas, as well as a connectorized version for use with 3rd party external antennas and coupled with improved transmit power and sensitivity, the XG family fits perfectly into a large array of applications such as backhaul in the telecom, ISP or enterprise markets, education, oil and gas, smart cities, video surveillance and public safety.

Important Notice

Legal Rights

© Copyright 2021 Infinet Wireless. All rights reserved.

The information contained in this document is originated by, proprietary, confidential and owned by Infinet Wireless. No part of this document should be disclosed, reproduced or distributed without the express written permission of Infinet Wireless Ltd.

Infinet Wireless Ltd. reserves the right to change the information contained in this document without prior notice. No part of this document may be considered as a part of any contract or warranty.

Statement of Conditions

Infinet Wireless Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this manual or equipment supplied with it.

Disclaimer

The software is sold on an "AS IS" basis. Infinet Wireless, its affiliates or its licensors make no warranties, whatsoever, whether express or implied, with respect to the software and the accompanying documentation. Infinet Wireless specifically disclaims all implied warranties of merchantability and fitness for a particular purpose and non-infringement with respect to the software. Units of product (including all the software) delivered to purchaser hereunder are not fault_ tolerant and are not designed, manufactured or intended for use or resale in applications where the failure, malfunction or inaccuracy of products carries a risk of death or bodily injury or severe physical or environmental damage (“high risk activities”). High risk activities may include, but are not limited to, use as part of on-line control systems in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, life support machines, weapons systems or other applications representing a similar degree of potential hazard. Infinet Wireless specifically disclaims any express or implied warranty of fitness for high risk activities.

Indication of the countries

Infinet Wireless equipment has no geographical limitations for selling and can be supplied to any country of the world.

Limitation of Liability

Infinet Wireless shall not be liable to the purchaser or to any third party, for any loss of profits, loss of use, interruption of business or for any indirect, special, incidental, punitive or consequential damages of any kind, whether arising under breach of contract, tort (including negligence), strict liability or otherwise and whether based on this agreement or otherwise, even if advised of the possibility of such damages.

To the extent permitted by applicable law, in no event shall the liability for damages hereunder of Infinet Wireless or its employees or agents exceed the purchase price paid for the product by purchaser, nor shall the aggregate liability for damages to all parties regarding any product exceed the purchase price paid for that product by that party (except in the case of a breach of a party’s confidentiality obligations).

About This Manual

This manual provides detailed technical information on the operation of the InfiLINK XG, including system specifications, installation, commissioning, maintenance and troubleshooting.

The document is intended to be used by qualified RF engineers/technicians and IT professionals. Qualified personnel should have skills and experience in the following areas:

  • Outdoor/indoor radio equipment installation
  • Outdoor wireless networks
  • TCP/IP networking protocols
  • Safety procedures and instructions for installing antenna equipment
  • Professional manage of electrical equipment and accessories
  • Safety procedures and instructions for working on towers and heights.

Table of contents

  • No labels