Page tree
Skip to end of metadata
Go to start of metadata

Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.

To the certification exam

CAUTION

Configurations from the scenarios below are examples that demonstrate the potential capabilities of the Infinet Wireless devices. The configurations may vary depending on the model and firmware version. We do not recommend copying this solutions to the hardware without checking.

Description

It is easy to fully reserve a connection by combining two radio channels into one MINT domain. The traffic path will be automatically selected based on the quality of each radio link in this case.

Configuration Example

A management is VLAN 100 in switch group #100. A transport of user data is in switch group #1.

  • Configure Master 1 and Slave 1 as the main link.

    Master 1
    rf rf5.0 band 40
    rf rf5.0 mimo
    rf rf5.0 freq 5000 bitr 300000 sid 10101010 burst
    rf rf5.0 txpwr 25 pwrctl distance auto
    dfs rf5.0 dfsoff
    mint rf5.0 -roaming leader
    mint rf5.0 -type master
    mint rf5.0 -name "Master 1"
    mint rf5.0 -key "123456789"
    mint rf5.0 poll start
    ifc svi100 up
    ifc vlan100 vlan 100 vlandev eth0 up
    sw group 100 add vlan100 rf5.0
    svi 100 group 100
    ifc svi100 192.168.1.1/24
    sw group 100 stp on
    sw group 100 start
    Slave 1
    rf rf5.0 band 40
    rf rf5.0 mimo
    rf rf5.0 burst
    dfs rf5.0 dfsoff
    mint rf5.0 prof 1 -band 40 -freq 5000 -bitr 300000 -sid 10101010 -nodeid 00020 -type slave -netid 0 -minbitr 30000 -autobitr -mimo -key "123456789"
    mint rf5.0 -name "Slave 1"
    ifc svi100 up
    ifc vlan100 vlan 100 vlandev eth0 up
    sw group 100 add vlan100 rf5.0
    svi 100 group 100
    ifc svi100 192.168.1.2/24
    switch group 100 order 1
    sw group 100 stp on
    sw group 100 start
  • Configure Master 2 and Slave 2 as a backup link.

    Master 2
    rf rf5.0 band 40
    rf rf5.0 mimo
    rf rf5.0 freq 5100 bitr 300000 sid 10101010 burst
    rf rf5.0 txpwr 25 pwrctl distance auto
    dfs rf5.0 dfsoff
    mint rf5.0 -roaming leader
    mint rf5.0 -type master
    mint rf5.0 -name "Master 2"
    mint rf5.0 -key "123456789"
    mint rf5.0 poll start
    ifc svi100 up
    ifc vlan100 vlan 100 vlandev eth0 up
    sw group 100 add vlan100 rf5.0
    svi 100 group 100
    ifc svi100 192.168.1.3/24
    switch group 100 order 1
    sw group 100 stp on
    sw group 100 start
    
    Slave 2
    rf rf5.0 band 40
    rf rf5.0 mimo
    rf rf5.0 burst
    dfs rf5.0 dfsoff
    mint rf5.0 prof 1 -band 40 -freq 5100 -bitr 300000 -sid 10101010 -nodeid 00040 -type slave -netid 0 -minbitr 30000 -autobitr -mimo -key "123456789"
    mint rf5.0 -name "Slave 2"
    ifc svi100 up
    ifc vlan100 vlan 100 vlandev eth0 up
    sw group 100 add vlan100 rf5.0
    svi 100 group 100
    ifc svi100 192.168.1.4/24
    switch group 100 order 1
    sw group 100 stp on
    sw group 100 start 
    
  • Create united MINT domain.

    Master 1
    ifc prf0 up
    prf 0 parent eth0
    mint prf0 -name "Master 1 prf"
    mint prf0 -nodeid 00050
    mint prf0 -type master
    mint prf0 -mode fixed
    mint prf0 -key "123456789"
    mint prf0 -authmode public
    mint prf0 start
    mint join rf5.0 prf0
    Slave 1
    ifc prf0 up
    prf 0 parent eth0
    mint prf0 -name "Slave 1 prf"
    mint prf0 -nodeid 00060
    mint prf0 -type master
    mint prf0 -mode fixed
    mint prf0 -key "123456789"
    mint prf0 -authmode public
    mint prf0 start
    mint join rf5.0 prf0
    
    Master 2
    ifc prf0 up
    prf 0 parent eth0
    mint prf0 -name "Master 2 prf"
    mint prf0 -nodeid 00070
    mint prf0 -type master
    mint prf0 -mode fixed
    mint prf0 -key "123456789"
    mint prf0 -authmode public
    mint prf0 start
    mint join rf5.0 prf0
    
    Slave 2
    ifc prf0 up
    prf 0 parent eth0
    mint prf0 -name "Slave 2 prf"
    mint prf0 -nodeid 00080
    mint prf0 -type master
    mint prf0 -mode fixed
    mint prf0 -key "123456789"
    mint prf0 -authmode public
    mint prf0 start
    mint join rf5.0 prf0
    


  • Configure switch groups.

    CAUTION

    If you do not exclude the interface eth0 on one of the devices or do not enable STP, then there will be a loop.

    The STP protocol is used to eliminate the loop In the example below.

    Master 1
    switch group 1 add eth0 prf0
    sw group 1 stp on
    switch group 1 start 
    Master 2
    switch group 1 add eth0 prf0
    sw group 1 stp on
    switch group 1 start 
    
    Slave 1
    switch group 1 add eth0 prf0
    sw group 1 stp on
    switch group 1 start 
    
    Slave 2
    switch group 1 add eth0 prf0
    sw group 1 stp on
    switch group 1 start