CAUTION
Configurations from the scenarios below are examples that demonstrate the potential capabilities of the InfiNet Wireless devices. The configurations may vary depending on the model and firmware version. We do not recommend copying this solutions to the hardware without checking.
Description
It is easy to fully reserve a connection by combining two radio channels into one MINT domain. If you configure the aggregation of channels, you can increase the maximum throughput of the entire radio link.
Configuration Example
A management is VLAN 100 in switch group #100. A transport of user data is in switch groups #1 on the both radiochannels. Numbers of switch groups can differs, because devices is not combine in one domain MINT.
Configure Master 1 and Slave 1 as the main link.
Master 1rf rf5.0 band 40 rf rf5.0 mimo rf rf5.0 freq 5000 bitr 300000 sid 10101010 burst rf rf5.0 txpwr 25 pwrctl distance auto dfs rf5.0 dfsoff mint rf5.0 -roaming leader mint rf5.0 -type master mint rf5.0 -name "Master 1" mint rf5.0 -key "123456789" mint rf5.0 poll start ifc svi100 up ifc vlan100 vlan 100 vlandev eth0 up sw group 100 add vlan100 rf5.0 svi 100 group 100 ifc svi100 192.168.1.1/24 sw group 100 stp on sw group 100 start
Slave 1rf rf5.0 band 40 rf rf5.0 mimo rf rf5.0 burst dfs rf5.0 dfsoff mint rf5.0 prof 1 -band 40 -freq 5000 -bitr 300000 -sid 10101010 -nodeid 00020 -type slave -netid 0 -minbitr 30000 -autobitr -mimo -key "123456789" mint rf5.0 -name "Slave 1" ifc svi100 up ifc vlan100 vlan 100 vlandev eth0 up sw group 100 add vlan100 rf5.0 svi 100 group 100 ifc svi100 192.168.1.2/24 switch group 100 order 1 sw group 100 stp on sw group 100 start
Configure Master 2 and Slave 2 as a backup link.
Master 2rf rf5.0 band 40 rf rf5.0 mimo rf rf5.0 freq 5100 bitr 300000 sid 10101010 burst rf rf5.0 txpwr 25 pwrctl distance auto dfs rf5.0 dfsoff mint rf5.0 -roaming leader mint rf5.0 -type master mint rf5.0 -name "Master 2" mint rf5.0 -key "123456789" mint rf5.0 poll start ifc svi100 up ifc vlan100 vlan 100 vlandev eth0 up sw group 100 add vlan100 rf5.0 svi 100 group 100 ifc svi100 192.168.1.3/24 switch group 100 order 1 sw group 100 stp on sw group 100 start
Slave 2rf rf5.0 band 40 rf rf5.0 mimo rf rf5.0 burst dfs rf5.0 dfsoff mint rf5.0 prof 1 -band 40 -freq 5100 -bitr 300000 -sid 10101010 -nodeid 00040 -type slave -netid 0 -minbitr 30000 -autobitr -mimo -key "123456789" mint rf5.0 -name "Slave 2" ifc svi100 up ifc vlan100 vlan 100 vlandev eth0 up sw group 100 add vlan100 rf5.0 svi 100 group 100 ifc svi100 192.168.1.4/24 switch group 100 order 1 sw group 100 stp on sw group 100 start
Configure switches. Switch configuration is not included in this example.
Configure switch groups.
CAUTION
The switching group number for the data transmission on Master 2 and Slave 2 must differ from the group number on Master1 and Slave 1, or it might cause the loop.
Master 1switch group 1 add eth0 rf5.0 sw group 1 repeater on switch group 1 start
Slave 1switch group 1 add eth0 rf5.0 sw group 1 repeater on switch group 1 start
Master 2switch group 2 add eth0 rf5.0 sw group 2 repeater on switch group 2 start
Slave 2switch group 2 add eth0 rf5.0 sw group 2 repeater on switch group 2 start