Optional indoor/outdoor DC injector with built-in lightning protection. It greatly reduces complexity of the deployment in the cases where DC source is available on the rooftop eliminating the need of weather-sealed cabinets. AUX-ODU-INJ-G is compatible with all Infinet Wireless devices.
Parameter | Description | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size and Weight | 34x94x121 mm, 0.28 kg | |||||||||
Connectors and Interfaces |
| |||||||||
Supported Ethernet Modes |
| |||||||||
Water and Dust Protection |
| |||||||||
Operating temperature range |
| |||||||||
DC Range |
| |||||||||
CAUTION Using inappropriate DC source will damage the ODU, which will be not covered by warranty | ||||||||||
Ethernet Connectors Pin-out | ETH IN | Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Description | Data pair A+ | Data pair A- | Data pair B+ | Data pair C- | Data pair C+ | Data pair B- | Data pair D+ | Data pair D- | ||
ETH OUT | Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
Description | Data pair A+ | Data pair A- | Data pair B+ | +VDC + Data pair C- | +VDC + Data pair C+ | Data pair B- | -VDC + Data pair D+ | -VDC + Data pair D- | ||
Lightning Protection | In compliance with:
|
Packing List
AUX-ODU-INJ-G is supplied with a worm clamp TORRO 40-60/9 C7 W4 DIN 3017 - 2 pcs. The clamp is made of stainless steel A4, width 9 mm, allows the installation on a mast with a diameter of 35 to 60 mm. In case of mast diameter more than 60 mm, a similar clamps (up to a 230 mm diameter) with a width of up to 12-13 mm can be used.