Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

sys uptime

Displays the system up time since the last reboot and the reason of this reboot.

Figure - "sys uptime" command output

The possible options are:

  • Software fault
  • Unexpected restart
  • Manual restart
  • Manual delayed restart
  • Firmware upgrade
  • SNMP managed restart
  • Test firmware loaded.

sys log show

Displays the unit event log.

sys info -full

Displays the detailed information about:

  • System
  • Memory
  • CPU
  • Flash
  • DFFS
  • License
  • PHY0
  • PHY1.

Figure - "sys info -full" command output

config show

Displays the current unit configuration.

ifconfig -a

Displays the detailed information about network and radio interface.

Figure - "ifconfig -a" command output

license -show

Displays options available in this license

Figure - "license -show" command output

ctl

Displays the switch board temperature.

Figure - "ctl" command output

tsync

Displays the synchronization statistics via built-in GLONASS/GPS receiver.

mem

Displays the memory utilization statistics.

Figure - "mem" command output
  • No labels