Page tree
Skip to end of metadata
Go to start of metadata

Successfully pass the free certification exam at IW Academy and become an Infinet Certified Engineer.

To the certification exam

Overall functionality overview

Web-interface is used for easy device management and monitoring via graphical web-based interface. Web-interface allows:

  • Monitoring device interfaces statistics
  • Monitoring radio link statistics
  • Viewing and changing device configuration
  • Access to graphical antenna alignment tool
  • Running wireless link throughput tests
  • Device maintenance and support
  • Access to Spectrum Analyzer tool
  • Viewing the system log
  • DFS operation monitoring.
  • For detailed information about device configuration through the web-interface please refer to the R5000 WEB GUI User Manual.

Prerequisites

In order to run and properly use the application, the following requirements must be met:

  • Web-browser
  • Latest WANFleX OS version installed on the device
  • Web-interface support activated on the device («webcfg start» command) - enabled by default

To connect to the device via Web-browser type: http://<device IP-address> (by default: http://10.10.10.1) in your browser.

For a secure SSL-protected connection use https://<device IP-address> (by default: https://10.10.10.1) address.

Localization

Web-interface supports multiple locale sets, such as: English (default), Russian, Italian, French and Chinese.

Use the Language drop-down menu in the upper-right corner of the web-interface window to set up a locale for the current session (the default locale will remain unchanged).

To make permanent locale changes follow the instructions given in the System Settings paragraph of the Basic Settings section.