For successful alignment with InfiPOCKET, a network connection between the smartphone and the wireless device should be established. In order to do this, select one of the connection methods and make the appropriate network settings.
Method № 1 Using a wireless access point and power bank. The smartphone is connected to the access point via Wi-Fi. The power bank acts as a power source for both the wireless access point and the Infinet Wireless device. Network connection scheme - with access point. Requirements:
| |
Method № 2 Using a wireless access point with built-in battery and PoE-Out support. The smartphone is connected to the access point via Wi-Fi. The access point has a built-in battery that powers both the access point itself and the Infinet Wireless device. Network connection scheme - with access point. Requirements:
| |
Method № 3 Using a wireless access point with a built-in battery and an external power supply. The smartphone is connected to the access point via Wi-Fi. The access point is connected to a wireless device via a proprietary power injector. The access point has a built-in battery that powers the access point only. The Infinet Wireless device is powered by a proprietary power injector connected to a power source. Network connection scheme - with access point. Requirements:
| |
Method № 4 Using USB ↔ RJ45 wired adapter and external power supply. The smartphone is connected directly to the proprietary power injector via a USB ↔ RJ45 adapter. The Infinet Wireless device is powered by a proprietary power injector connected to a power source. Network connection scheme - without access point. Requirements:
|
Network settings are required to provide IP network connectivity between the smartphone and the wireless device. You can perform the setup in accordance with the hardware used and your preferences.
Examples of basic networking schemes are described below.
Explanations:
Explanations: