sys uptime

Displays the system up time since the last reboot and the reason of this reboot.

The possible options are:

• Software fault
• Unexpected restart
• Manual restart
• Manual delayed restart
• Firmware upgrade
• SNMP managed restart
• Test firmware loaded.

sys log show

Displays the unit event log.

sys info -full

Displays the detailed information about:

• System
• Memory
• CPU
• Flash
• DFFS
• License
• PHY0
• PHY1.

config show

Displays the current unit configuration.

ifconfig -a

Displays the detailed information about network and radio interface.

license -show

Displays options available in this license

ctl

Displays the switch board temperature.

tsync

Displays the synchronization statistics via built-in GLONASS/GPS receiver.

mem

Displays the memory utilization statistics.