Reports subsystem - provides InfiMONITOR users the possibility to analyze the conditions of hosts and links. Reports, presented in graphs and data tables, helps wireless network operators to forecast changes and demands to scale the network.

"Reports" menu has the following sections:

  1. Switch between Links and Hosts graghs.
  2. Parameter selection. Links and hosts have different parameters specified below.
  3. View:
  4. Time range.

Linear graph 

"Linear graph" graphs shown for the selected hosts and links.

Hosts and links can be selected in the right sidebar.

 The maximum number of the displayed in the graph hosts 10, links - 3.

The hosts can be filtered by the "Product family", links - by the "Link type".

 List of selected hosts and links is saved when switching from one graph to another. Use "Deselect all" to reset selection.

Graphs can be created per different parameters of hosts and links:


Parameter
Host
  • CPU Load
  • Memory usage
  • Board temperature
  • Firmware
  • Device status
Link
  • TX bitrate, Mbps
  • TX Power, dBm
  • RX Load, kbps
  • RX Load, pps
  • Link load, %
  • Current level, dBm
  • Retries, %

The graph generates using the following values:

Color line indication for each host/link provides better visualization of the linear graphs. 

The time stamp is fixed, thus when you select a point on the graph (vertical line),  the parameter values for all hosts/links are displayed in the new table:

Data table 

"Data table" generates for all available hosts.

The table cell indicates the time when the host parameter had indicated range value.

Time range 

The subsystem allows users to select the time range for the graphs generation. The arbitrary or predefined date and time can be selected.