IDU-LA-G(V.01) is an indoor DC/DC injector. It greatly reduces complexity of the deployment in the cases where DC source is available thus reducing both capital expenditures and total cost of ownership.
IDU-LA-G(V.01) may be used for the following purposes:
- To serve as a line protection unit for indoor network equipment connected to the second Ethernet port on ODU.
- To connect third-party DC power sources to ODU (for example, to power the unit from solar power or wind power sources).
Technical parameters
| Parameter | Description |
|---|
| Compatible models | InfiLINK XG, InfiLINK XG 1000, InfiLINK 2x2, InfiMAN 2x2, Quanta 5, Quanta 6, Quanta 70, InfiLINK Evolution, InfiMAN Evolution |
|---|
| Output Voltage | The same as input |
|---|
| Supported Ethernet Modes | 10/100/1000 Mbps (Gigabit Ethernet pass-through) |
|---|
| Pin assignment and polarity | 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) |
|---|
| DC Range | Acceptable input DC range depends on the specific ODU model:
• InfiLINK XG, InfiLINK XG 1000, InfiLINK 2x2 PRO, InfiMAN 2x2 BS, Quanta 70, Quanta 5, Quanta 6, InfiLINK Evolution, InfiMAN Evolution models: ±43... ±56 VDC
• InfiLINK 2x2 Lite, InfiMAN 2x2 STE models: +9... +56 VDC (positive voltage only) |
|---|
| Size and Weight | 115×65×40 mm, 0.15 kg |
|---|
| Operating temperature range | from 0°С to +40°С |
|---|
|
Exposing unit to the unsupported voltage will result in irreparable damage to the unit! Always observe power requirements! |
Connectors description
Mounting holes sizes
IDU-LA-G(V.01) Packing List
Cable assembly
