The packets received on the wired interface can be marked with a specific 802.1p priority.
Example - configuring 802.1p priority "5" for the traffic received on VLAN 100 at "ge0"
The 802.1p priority assignment takes place only for the incoming packets with 802.1Q tags (VLAN tags) at the wired interfaces. In order to specify the 802.1p priority associated to a VLAN, go to the “Switch” menu page in the Web interface then proceed to add new VLAN:
“on” - allows VLAN to pass through that port
“off” - does not allow VLAN to pass
“native” - allows VLAN to pass, and also allows the untagged traffic to pass through that port.
Below, we can see how 802.1p priority "5" was assigned to the traffic received with VLAN 100 at the "ge0" interface. Priority "5" will not be assigned to the traffic incoming at the "radio" interface even if VLAN 100 is allowed to pass through the "radio" interface