In this chapter are presented the basic troubleshooting actions to be taken in case a problem occurs to the InfiLINK XG wireless link. The general fault classification can be checked below and the detailed indications for fault handling are described in the subsequent sections.
Preliminary definitions:
- For each radio link, the local unit will be considered the one closest to the monitoring center and the remote unit will be its peer end like in the picture below
- If the radio link (between the local unit and the remote unit) or the Ethernet connection (between the monitoring center and the local unit) become unavailable, all units/equipment behind the failure point will be unreachable. The debugging should begin in this case, at the unit that is closest to the failure point and has management access
