Use this command to handle the GPS/GLONASS-receiver.
Syntax:
#1> gps [options] [command]
Options: -t=<level> - turn trace level (1, 2 or 0 - turn trace off) -i=<int> - set integrator time constant in seconds -a[=(0:1)] - turn the power on the antenna amplifier -r[=(0:1)] - set reset signal -p=<port> - set TCP port for service (2323 by default) -s=<baudrate|0> - set baud rate for GPS NMEA port (0 - set 115200) Command: start - start GPS service stop - stop GPS service coordinates - show GPS coordinates console - map GPS NMEA port to stdin/stdout tcp - map GPS NMEA port to TCP service stat - show GPS statistics clear - clear GPS statistics |
|
|
Please note, that "tcp" and "console" commands and "-i", "-r", "-p" and "-s" options are used for diagnostics and debugging on emergency by specialists only. |