This page is intended to show the Quanta 5 web interface options that provide a wide range of monitoring capabilities. This article is only intended to briefly show the main parameters for device monitoring and troubleshooting. For more information about the Web interface please proceed to Quanta 5 / Quanta 6.

Monitoring options

Dashboard

This section is intended to provide the main information about the wireless unit operation. 

The Dashboard displays a read-only summary of the current link status information, local and remote device signal strength, capacity for downlink and uplink, current values of the basic configuration settings and the Ethernet network status.

The wired interface state monitoring is also available in this section. The Quanta 5 device has one wired gigabit Ethernet interface, its status and current load can be viewed in real time.

Modulation and coding scheme

For the Quanta 5 device, the modulation and coding schemes are selected independently for each channel (uplink and downlink) for both polarizations. Quanta 5 supports 14 modulation-coding schemes from QPSK 1/4 to QAM256 7/8. The current modulation for each channel is displayed in the MCS subsection.

Received signal strength indicator

The RSSI indicator displays the received signal level for each channel (uplink and downlink) and both polarizations. Available values:

Carrier to Interference + Noise Ratio

The CINR indicator shows the signal quality, more precisely, how strong is the carrier signal compared to the noise plus interference level. Available values:

Retries and Frame loss

Retried and lost packets need also to be tracked. Retries should tend to zero and a link with a retries value more than 5% should not be allowed to operate.

System log

An important tool in troubleshooting, which allows to track changes that preceded the link degradation. To view the system log, go to "Service" → "Maintenance" → "Device information" and click the "Show log" button.

Management options

Quanta 5 management options are available in the "Maintenance" section, which allows to perform firmware updates, operations with licenses and with the configuration, as well as device reboot and reset to factory settings.

License

The license contains information about the allowed frequencies, the channel width and the power limit. This section allows to view the current license and upload a new one. To upload a license on the device, click on the "Upload license" button and drag and drop a file from your file manager into the dotted area.

Firmware

There are two options to upgrade the firmware on the device:

Configuration

The Quanta 5 device allows to upload, download and view the current configuration in text form. To view the configuration, click on the "Show current configuration" button and the file will open in a new window. To download the configuration, click on the "Download current configuration" button and the configuration can be loaded by clicking on the "Upload configuration" button, or you can drag and drop a file from your file manager into the dotted area.

Diagnostic card

In situations when the help of the InfiNet Wireless technical support team is required, the diagnostic card is a necessary tool which helps to detect and solve an issue faster and more effective. Click on the "Download" button to create the diagnostic card.