The "General settings" section allows to configure basic system parameters, described in the table below.
This section includes two main csubsections:
Unit
These parameters are used for identification and link authorization.
| Parameter | Description |
|---|
| Device name | The arbitrary wireless unit name which will be used by network administrators for unit identification. It will be shown in Web GUI side panel. |
|
SNTP
Starts the SNTP time synchronization service. For proper operation, specify the SNTP server time zone and the IP address first. By default, the SNTP service is disabled.
| Parameter | Description |
|---|
SNTP server address
| The SNTP server IP address, the SNTP service will synchronize the time on the device with. The device must have network access to the SNTP server. | Time zone
| The time zone at the place of device installation. For example: GMT + 5. |
|
Syslog
Allows to transmit syslog data to the server using the "syslog" protocol. Specify the syslog server address where data should be transmitted.
