Technical User Manual |
R5000 - WANFleX OS |
This manual lists the commands of the WANFleX operating system used in the all InfiNet Wireless families devicess.
This manual is fully applicable for InfiLINK 2x2, InfiMAN 2x2, InfiLINK Evolution, InfiMAN Evolution families.
For device’s management and configuration a Unix-like command line interface is used. Every command is having power right after Enter key is pressed. However, each command lifetime duration is limited within one configuration session. In order to save a current configuration config save command is used.
Several commands can be grouped in one line using “;” character. If a wrong-syntax line is met in the group, the rest of the string is checked anyway and the wrong command is ignored. Command name can be shortened unless the ambiguity occurs.
If your terminal supports VT100 or ANSI standard you can move around the list of recently executed commands using cursor keys. Numbered list of these commands can be reviewed by “!h” command. Any command from this list can be available using “!<NUMBER>” command. TAB key performs substring search of recently executed commands.
Ctrl/R combination refreshes the command string if its content was disturbed by system messages.
The command executed with no arguments prints a short hint about its keys, parameters and syntax.
Context help can be obtained by printing “?” in any position of the line.
Table of contents |