View Source

The "Network Access" page allows you to perform general networking configuration settings and it is divided in the following two sections:

"Network Settings" - allows you to configure the IP address of the unit, to specify a VLAN ID to pass and to enable or disable the DHCP for the IP address allocation. Multiple IP addresses can be added

Infinet Wireless: Technical Documentation > Network Access > image2017-4-20 10:28:49.png

"Routing Settings" - allows you to configure the routing information for the unit. You can input the default gateway IP address and add a route to a specific destination by specifying the destination network address, the network mask and the gateway for reaching the destination

Infinet Wireless: Technical Documentation > Network Access > image2017-4-20 10:29:29.png

Read the information at the section Apply and Try buttons in order to find out the output of the «Apply», «Try» and buttons for the new configuration performed.